About Installing a Kohler Caxton Sink

The installation of a Kohler Caxton sink is usually the job of a professional. However, is it economical and sensible to install the sink yourself. If you are familiar with do it yourself projects, installing a sink a matter of understanding the functions of each part. Installing a Kohler Caxton will take a novice handy man about an hour or two.

Preparation: When you prepare for a sink installation your reduce the chances of failed attempts and missing tools or parts.

• Read any manuals and guides that are attached to the Kohler Caxton sink model. Make sure you have caulking, anchors and tools to hold your sink in place while you are doing the installation.


• Have the sink pre-cut and edged by a professional. This is best done by a professional because of the tools needed for cutting and edging. This is can be done al la carte and does not require a professional visit to your home.

Installation: Installing the sink should not take more than 2 hours for the average handy man or woman.

• Turn the Kohler Caxton sink upside down and mark the anchor positions. You can align the holes for the anchors better if when the sink is upside down. Drill holes through your anchors while the sink is upside down.


• Clean any dust or particles around the drill holes. If you use a tool for this, a rubber bulb syringe will work.


• Remove the sink and insert the anchors into the drill anchor holes.


• Place caulking along the edges of the sink cut out. Insert the sink base on top of the caulking and in the cut out.


• Install the sink clamps and allow the caulk to dry before attaching the plumbing.

Tips: Tips offers easier more productive ways of installing a Kohler Caxton sink.

• Use a bold color or heavy marking for an easy target when installing.


• Use a hammer to secure the anchors into position.


• Silicone bath caulking works great for installing a Kohler Caxton sink.