How to Remove a Mobile Home Window for Cleaning
The windows to mobile homes are commonly made of aluminum frames that hold the window. Over time the window and frames can become very dirty. The best way to clean mobile home windows is by removing them so you can get the dirt that may be in between the window and the aluminum frame. Removing the window is not like removing windows on a house because the mobile home windows are usually secured with screws.
How to Remove a Mobile Home Window for Cleaning
Materials Needed
- Zip tool
- Step ladder
- Cordless screwdriver
- Quarter inch socket
- Utility knife
- Putty knife
1. The siding will have to be removed first if it is present. Most mobile homes have them. Use a zip tool to make the process move rapidly. Wedge the curved part of the zip tool under the siding. Apply downward pressure on the handle to loosen the siding. Work the tool around the siding to loosen it. Remove the siding.
2. Set a stepladder near the window so you can reach the top frame. Remove the screws with a cordless screwdriver. The cordless screwdriver should have a quarter inch socket attached to it. Remove all of the screws around the frame.
3. Use a utility knife to pry between the frame and the wall. This will allow you to cut the adhesive seal there. Work your way around the entire perimeter of the frame.
4. Grab the window and pull it from the mobile home. Use a putty knife to remove any remaining adhesive.